AIRAID CAD Air Intake System Installation - 2006 Chrysler 300C- Video
Today is a 2006, Chrysler 300C. We're going to install part number Ar350-199 from AIRAID. To start off our install, we're going to go ahead and disconnect the negative cable from the battery located in the trunk. Next we need to loosen the hose clamp that holds the factory intake tube to the throttle body. Next, we'll go ahead and disconnect the breather hose from the factory air box lid. Then we'll go ahead and remove the lid to the air box. We'll pull both lock down tabs towards the front. more
10/24/2013 5:04:29 PM
AIRAID CAD Intake System Installation - 2003 Chrysler PT Cruiser- Video
Today, on our 2003 Chrysler PT Cruiser, we're going to install part number AR300-138 from Airaid. This is the Airaid Cad intake system with a sensiflow filter, stage one. To start off our install, we'll go ahead and disconnect the negative battery cable. Then we need to remove the factory air lid. To do this, we'll go ahead and loosen up the clamp on the factory intake tube at the box lid. Then we can go ahead and unclip the factory air box lid, and remove it from the vehicle. Now typically, there's two clips; on this particular vehicle, one of the clips is missing. more
10/10/2013 10:00:45 AM
Filter Videos
Filter Videos
